Ecumaster PMU-24 DL Power Management Unit with Data Logging PMU PDU PDM

Ecumaster PMU-24 DL Power Management Unit with Data Logging PMU PDU PDM

The Ecumaster PMU-24 DL is an advanced power management unit designed for professional motorsport, race car, and custom vehicle electrical systems.

The PMU-24 DL offers the advantages of the PMU-16, with additional high-side power outputs and integrated data logging memory. It provides reliable electronic power distribution, replacing traditional relays and fuses with fully programmable solid-state control.

With 24 high-side outputs, up to 16 analog inputs, dual CAN bus, built-in data logging, real-time clock, and integrated accelerometer/gyroscope, the PMU-24 DL is a powerful solution for complex vehicle electrical systems.

As with Ecumaster products, mating connectors and terminals are included at no extra cost, helping save money and avoiding the need to order separate or unnecessary components.

Key Features

Advanced Power Management Unit
Professional PMU for motorsport and performance vehicle electrical systems.

24 High-Side Power Outputs
Includes 10 × 25A, 6 × 15A, and 8 × 7A high-side outputs.

170A Total Continuous Current
Capable of handling up to 170 amps total continuous current.

Integrated Data Logging
Built-in 256 MB data logger memory with logging frequency up to 500 Hz.

Real-Time Clock
Provides accurate data stamping for logged information.

Dual CAN Bus
Equipped with 2 × CAN 2.0 A/B communication channels.

Up to 16 Analog Inputs
Allows connection of multiple switches, sensors, and control inputs.

PWM Capable Outputs
The 10 × 25A high-side outputs are PWM capable.

Output Status LEDs
24 × tricolor LEDs show the state of each power output.

Built-In Motion Sensors
Integrated 3D accelerometer and gyroscope.

Wide Operating Voltage
Operates from 6–22V with transient immunity according to ISO 7637.

Motorsport Temperature Rating
AECQ-100 Grade 1 rated temperature range from -40°C to +125°C.

Connectors Included
Mating connectors and terminals are included at no extra cost.

General Specification

• 170A total continuous current
• Operating voltage: 6–22V
• Immunity to transients according to ISO 7637
• Temperature range: AECQ-100 Grade 1, -40°C to +125°C
• 10 × 25A high-side power outputs, PWM capable
• 6 × 15A high-side power outputs
• 8 × 7A high-side power outputs
• Up to 16 analog inputs
• 24 × tricolor LED output status indicators
• 2 × CAN 2.0 A/B
• 256 MB data logger memory
• Up to 500 Hz logging frequency
• Real-time clock for data stamping
• 3D accelerometer / gyroscope

Kit Includes

• 1 × Ecumaster PMU-24 DL Power Management Unit
• Mating connectors
• Terminals

Suitable Applications

• Motorsport electrical systems
• Race cars
• Rally cars
• Drift cars
• Drag cars
• Track cars
• Custom vehicle wiring
• Power distribution upgrades
• Relay and fuse box replacement
• Data logging and CAN-based vehicle systems

Important Notes

• A CAN interface is required for communication with the PMU
• Supported CAN interfaces include Peak-System, Kvaser, and Ecumaster
• Professional wiring and setup are strongly recommended
• Final configuration should be carried out by a competent installer or motorsport electronics specialist
• Please confirm your electrical requirements before ordering