Ecumaster Wheel Speed to CAN Module

Ecumaster Wheel Speed to CAN Module

The Ecumaster Wheel Speed to CAN Module is a compact motorsport electronics module designed to read wheel speed sensor data and transmit it over CAN bus to compatible ECUs, dashboards, data loggers, and other CAN-based devices.

Reading wheel speed data can be difficult on modern race and performance cars, especially where factory ABS systems use active magnetoresistive sensors. Attempting to tap directly into these signals can cause errors or interfere with the ABS system. The Ecumaster Wheel Speed to CAN Module is designed to read wheel speed signals without disrupting the sensor signal, helping retain full anti-lock braking system functionality.

This module is also useful as an expansion solution when an ECU does not have enough direct inputs for all four wheel speed sensors.

Key Features

Wheel Speed to CAN Conversion
Reads wheel speed sensor data and transmits it over CAN bus.

Supports up to 4 Sensors
Compatible with up to 4 wheel speed sensors.

Sensor Compatibility
Supports magnetoresistive, VR, and Hall effect wheel speed sensors.

ABS-Friendly Signal Reading
Designed to read sensor signals without disrupting the original signal or affecting ABS functionality.

CAN Bus Output
Sends wheel speed data to compatible dashboards, data loggers, ECUs, and other CAN-based devices.

Fully Customisable CAN Messages
CAN 2.0B support with customisable messages and data format.

Expansion Module Use
Can be used when the ECU does not have enough inputs to connect all four wheel speed sensors directly.

Configurable via CAN Bus
Setup and configuration are carried out over CAN bus.

Firmware Upgrade Support
Supports free firmware upgrades.

Typical Applications

• Race cars
• Rally cars
• Track cars
• Drift cars
• Time attack cars
• Motorsport ABS-equipped vehicles
• CAN dashboard installations
• Data logging systems
• ECU wheel speed expansion
• Traction control and speed-based strategies

Technical Details

Compatible Devices

Wheel speed data can be sent via CAN bus to compatible devices such as:

• Ecumaster EMU Black
• Ecumaster EMU Pro
• Ecumaster ADU digital dash
• Ecumaster PMU
• Compatible CAN dashboards
• Compatible CAN data loggers
• Compatible CAN-based ECUs

Contents

• 1 × Ecumaster Wheel Speed to CAN Module

Important Notes

• Professional installation and CAN configuration are recommended
• Compatibility depends on sensor type, vehicle wiring, CAN setup, and connected devices
• Always confirm sensor type before installation
• Designed to avoid disruption of sensor signals, but correct installation is essential
• CAN interface may be required for configuration