Link ECU CAN Connection Cable for Plug-in ECU’s CANJST

Link CANJST Cable – 5 Pin JST to DTM4

The Link CANJST Cable is used to add CAN communications to compatible Link G4+ and G4X Plug-In ECUs fitted with a 5-pin JST CAN connector.

It plugs directly into the CAN socket on the ECU PCB and terminates in a DTM4 male connector, allowing connection to compatible Link CAN accessories.

Suitable Applications

Designed for:

• Link G4+ Plug-In ECUs with a 5-pin JST CAN connector

• Link G4X Plug-In ECUs with a 5-pin JST CAN connector

• Adding CAN communication to compatible Plug-In ECUs

• Link CAN Extension Cable

• Link CAN Splitter Cable

• Other compatible Link CAN accessories

Please check your ECU before ordering to confirm that it uses a 5-pin CAN connector.

Key Features

• 5-pin JST ECU connection

• DTM4 male CAN connector

• Plugs directly into the ECU PCB

• 12V and Ground via flying leads

• Compatible with Link CAN accessories using the standard DTM4 connection

• Suitable for adding CAN communication to compatible Plug-In ECUs

CAN Pinout

• Pin 1: 12V

• Pin 2: Ground

• Pin 3: CAN Low

• Pin 4: CAN High

Not Compatible With

The following Plug-In ECUs require a CANJST4 cable instead:

• G4X Nissan GTR with E-Throttle

• G4X Nissan S15 with E-Throttle

• G4X Honda S2000 AP1

• G4X Subaru WRX V5-6

• G4X Honda HC20X Type-R DC5 / RSX

• G4X Subaru WRX11

• G4X MX5NB2X

• G4X MX5NB1X

• G4X WRX11 USDM

Electrical Specification

Maximum Input Voltage: 300V
Maximum Continuous Current Draw: 3A
Wire Size: 20 AWG / 0.5mm²

Dimensions

Length: 570mm
Width: 20mm
Height: 15mm

Weight

45g

What's Included

• Link CANJST 5-Pin JST to DTM4 Cable

Please Note

This cable is only suitable for Link Plug-In ECUs fitted with the correct 5-pin JST CAN connector.

Please check the CAN connector fitted to your ECU before ordering.

DTM4 Pin Out

Pin 4: CAN H
Pin 3: CAN L
Pin 2: Ground
Pin 1: 12V