LINK ECU G4 G4+ G4X 2.5 bar MAP Sensor & Connector / Plug

Link 2.5 Bar MAP Sensor

The Link 2.5 Bar MAP Sensor is a high-accuracy manifold absolute pressure sensor designed for boosted engine applications.

It measures from full vacuum up to 2.5 Bar absolute pressure, making it suitable for turbocharged and supercharged engines running up to approximately 1.5 Bar / 22 PSI of boost.

Suitable Applications

Designed for:

• All Link ECUs

• Other aftermarket ECUs with analogue MAP sensor inputs

• Turbocharged engines

• Supercharged engines

• Applications running up to 1.5 Bar / 22 PSI boost

Important Information

• Mount the sensor higher than the intake manifold connection point

• In PCLink, select “Link 2.5 Bar” as the MAP sensor type

• Not recommended for naturally aspirated applications

• Not suitable for boost levels above 1.5 Bar / 22 PSI

Key Features

• 0 to 2.5 Bar absolute pressure range

• High-resolution pressure measurement

• Compact aluminium enclosure

• 4mm / 3/16" hose barb connection

• Two-bolt mounting design

• Includes 3-pin Deutsch DTM connector kit

• Wiring pinout marked on the sensor housing

• Designed and manufactured by LinkECU

Pressure Range

0 to 2.5 Bar absolute

Equivalent to approximately:

• Full vacuum

• Up to 1.5 Bar boost

• Up to 22 PSI boost

Electrical Specification

Operating Voltage Range: 4.75V to 5.25V
Maximum Input Voltage: 5.25V
Maximum Continuous Current Draw: 10mA

PCLink Calibration

Select:

Link 2.5 Bar

Raw Calibration

• 0.5V = 35kPa

• 4.5V = 235kPa

Dimensions

Length: 60mm
Width: 50mm
Height: 20mm

Weight

40g

What's Included

• Link 2.5 Bar MAP Sensor

• Deutsch 3-Way Plug Kit

Please Note

This sensor is intended for boosted applications running up to approximately 1.5 Bar / 22 PSI of boost.

For higher boost levels, a higher-range MAP sensor should be used.