Camshafts

Will run on Standard Injection Application = Fast Road Cam Power Band = 3000-7000rpm Cam Lift Inlet = 9.14mm Cam Lift Exhaust= 8.12mm Duration Inlet = 280 Degree Duration Exhaust=...

Cosworth YB Double Valve Springs Shot peened Silicone Chrome - Highest quality spring steel. 190lbs Uprated from the standard 140lbs 32mm fitted height - direct fit for Cosworths. Perfect for...

YB Camshaft Pulleys (PAIR) Choice of colours available, totally customisable Fully adjustable. Hard Anodized to maximise life. Tight fit so pulley does not rock and crack like most others on...

Pair of FORD FIESTA ST150 NEWMAN Fast Road Camshafts - PAIR - Cam Shafts GROUND FROM BLANK SHAFTS (NOT REGRINDS) THIS IS FOR 2 CAMS ! WILL INCREASE PERFORMANCE ON STANDARD...

Cosworth BHP07 Camshaft ground from Blanks (Not reground) This is a very popular camshaft that has great results on standard engines. Same as AB07 Camshaft. Application = Fast Road / Track Day SpecialPower...

You are buying: 1 x Connector2 x Weather seals2 x Terminals Please check the Keyways!

Ford RS2000 Pinto Cam Followers Heavy Duty and correct ratio and pad length unlike a lot of aftermarket followers. As used in all our Cam Kits from Road to Race.

Ford Focus ST ST225 RS Mondeo 2.5T - Stage 2 Newman Camshafts GROUND FROM BLANK SHAFTS (NOT REGRINDS) GROUND TO EXACT BASE CIRCLE AS STANDARD SO DIRECT FIT PICTURE IS...

Alloy Vernier Pulley  (Blue, Black, Red available) M6 Cap Head adjustment Bolts are factory tightened to: 12 Nm. Ensure to tighten pulley bolt to the manufacturers torque wrench setting. All...

FORD 1.6 2.0 OHC Pinto STD Cam Camshaft Bearing Set

Ford RS Turbo Camshaft Kit - Standard Replacement GROUND FROM BLANK SHAFTS (NOT REGRINDS) Replacement Camshaft and followers ground from Chillcast blanks, Supplied with a full set of High Quality...

Roller Rocker Arm - ( Silver Rocker cover) Good Increae of Low Mid Range Power.  Application = Road Cam Power Band = 1500-5500rpm Cam Lift Inlet = 5.89mm Cam Lift...

Non Roller Rocker Arm - ( Black Rocker cover) Rally Cam giving plenty of Mid Range Power - Will not run on Standard Injection! Application = Fast Road / Tarmac...

Cosworth BHP 666 Camshaft ground from Blanks. (Not reground) Application = Road RacePower Band = 1750-7500 Lift : 9.66mm  Duration: 266 Please select from Inlet / Exhaust and also which head...

Full Set of 16  Fitment: Cosworth YB 16V Hydraulic  All Camshaft Orders take 10 Working Days from order unless in stock! 

Brand: Piper Camshafts You are Buying Alloy Vernier Pulley!! M6 Cap Head adjustment Bolts are factory tightened to: 12 Nm. Ensure to tighten pulley bolt to the manufacturers torque wrench setting....

You are buying a Full set of Double Valve Springs With Caps Rate N/mm : 55 Rate LbF :  312 Seat Pressure LbF : 70 Seat Pressure KG : 32...

ARP Camshaft Pulley BoltsM10 X 1.5 ThreadSuits: Ford Focus MK1 2.0 / Mondeo MK2 Zetec EnginesCheck Fitment Below: Ford Focus MK 1 (1998-2005) 2.0 10/1999 -> 04/2005 Petrol (EDDB)Ford Focus MK 1...

Alloy Vernier Pulley - PAIR (Blue, Black, Red) Fitment Vauxhall / Opel 2.0 16V C20XE Late Square Type Post 1993 Engines (Note: Uses 176 Tooth Timing Belt) C20 XE 2.0 16V...

Brand:  VICTOR REINZ or ELRING 81-51109-30

Cosworth YB Camshaft & AUX Shaft Woodruff Key You are buying : 1 X Camshaft / Auxillary Woodruff Key

Ford RS2000 Pinto Cam Lubrication Oil Rail Pipe Will fit all Pinto 1.3 1.6 and 2.0 Engines. Nice Quality Pipe.

(Not to be confused with normal cast replacement cams, this is made from the same blanks as our Full Race Cams ) Camshaft & Top Quality Race Spec Followers &...

Application = Race Cam Power Band = 4000-8000rpm Cam Lift Inlet = 11.80mm Cam Lift Exhaust= 11.75mm Duration Inlet = 296 Degree Duration Exhaust= 296 Degree