All Dash Displays & PDM

*Can to USB Box Required for Configuring.  Decades ago, the critical electronic components in a race car were the ignition coil and points. Race cars now feature advanced engine management...

The Aim MXS Strada Car Dash Display is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and streets all over the world. The MXS Strada...

uSDM 100 & 102 available - Check Out comparison in photo.  Small in size, big in performance, the 2.4” High-Contrast OLED Micro Dash Display is fully compatible for all of our Syvecs...

The ECUMASTER USB to CAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It is equipped...

*Requires a Can to Usb Box for Configuring ADU5 IP65 - Dust and Water Resistant ADU7 AutoSport Advanced Display Unit with Logging: The ADU7 AutoSport Display is identical in specification...

MXS Dash Bracket. Due to the size of the Dash, this will probably more likely be used with our single mount centre hub on the steering column or our chassis...

With every purchase we offer free technical support including a team viewer session if required. THE Aim MXP Strada Dash Display Street Icons Version offers 50% more display area than...

The Aim MXG Strada 1.2 Dash Display Standard Icons offers 50% more display area than the 5'' MXS display, in a similar dimension. The dash logger has an integrated shift...

 The Kit Includes: MXG Strada 1.2 OBD2 23 Pin Loom IVA Loom 14 Pin Loom USB Cable AiM Sticker Wheel Speed Sensor For OEM and Kit Car Builders! The road...

The MXG Dash Bracket is engineered to fit the MXG to the steering wheel column using the Universal Steering Wheel single Hub Mount and tabs.      MXG Dash Bracket....

Link Plug-In ECU & WIREIN ECU CAN cable and terminating resistor, 2m long ideal for Dash installs

Haltech IC-7 CAN OBDII Display Dash Be one of the first people this Christmas to get your hands on the new Haltech Dash, stock is limited as everyone wants them so...

Haltech ECU - NEXUS R5 Vehicle Control Unit VCU Inbuilt ECU - PDM - Dual Chanel Wideband - Data LoggingOUTPUTS: Up to 18 injector and 12 ignition SUITS: Racing application where advanced...

The Aim PDM32 Power Distribution Module is designed to effortlessly replace traditional fuse and relay systems by distributing power to various circuits in your vehicle. With 28 high side outputs...

 The Kit Includes: MXG Strada 1.2 CAN 23 Pin Loom IVA Loom 14 Pin Loom USB Cable AiM Sticker Wheel Speed Sensor For OEM and Kit Car Builders! The road...

The Kit Includes: MXP Strada 1.2 OBD2 23 Pin Loom IVA Loom 14 Pin Loom USB Cable AiM Sticker Wheel Speed Sensor GPS Available: 50CM, 1.3M , 2M ,4M ,...

The Kit Includes: MXP Strada 1.2 CAN 23 Pin Loom IVA Loom 14 Pin Loom USB Cable AiM Sticker Wheel Speed Sensor GPS Available: 50CM, 1.3M , 2M ,4M ,...

 The Kit Includes: MXS Strada 1.2 OBD2 23 Pin Loom 14 Pin Loom USB Cable Wheel Speed Sensor AiM Sticker GPS AVAILABLE: 0.50cm, 1.3M, 2M , 4M , 2M ROOF...

SUITS: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs INCLUDES: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs NOTES: Use with Link Plug-in range...

The RTCM power distribution module (PDM) from DTAFast is designed to replace conventional relays and fuses in competition vehicles. Made using self-protected transistors and using a new generation microprocessor which...

Link G4+ G4X Wire In ECU'S CAN cable (CANDASH) For Custom Display CAN cable compatible with LINK ecu's to provide custom displays on associated screens / monitors-   Atom  Storm  Xtreme  Thunder Plugins...

OBD2 Under Dash Mount Socket, Plug, Connector Right angled connector for under dash mounting, come with 4 terminals for CAN based OBD. Complete with: Right Angled Connector Diagnostic Cover 2...

Haltech IC-7 Display Dash Mount  SUITS: Haltech iC-7 Display Dash INCLUDES: 1 x 2.5mm Black Annodized Aluminium Bracket NOTES: Suits Haltech iC-7 Display Dash

Ready to Work with DTA S series ECU   The new NTX Dash is a powerful full colour digital dashboard for use at all levels of motorsport. A 4.3” TFT...

Ready to Work with DTA S series ECU   The new DTA NT-Dash is a powerful full colour digital dashboard for use at all levels of motorsport. A 5.0” TFT...