ECUMASTER 7" ADU Digital Dash Display & Premade Loom & GPS & CAN to USB Box Kit

  • £2,105.00
    Unit price per 
Tax included.


You are buying a 7" ADU & Pre MADE Loom & GPS & Can to USB BOX 

We are proud to announce the new ECUMASTER Racing Dash family of products. We designed the ADU5 and ADU7 in response to market demand for a cost-effective dash display with logging capabilities. Our specific goal was to create a fully customizable, feature-rich, quality solution for competitive drivers. We consulted professional drivers and race engineers and designed the ADU to exceed their requirements.

Above all, the ADU is designed to display all critical information in an easy to read manner, along with a comprehensive strategy for displaying alarms.

Our Advanced Display Units are available in 5” and 7” versions. Both versions feature high resolution, high visibility anti-glare screens, guaranteeing perfect visibility in any lighting conditions. The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.). Pages may be changed manually or automatically (based on defined conditions). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified in real time using user-friendly Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independent of the actual page displayed.

The ADU is also equipped with 15 ultra-bright RGB LEDs which can be used as an advanced gear-depended shift light and can be modified by user-defined logic (for alarms, low fuel level, etc.).
Using IR beacons or a GPS system, the dash turns into a powerful lap timer with a predictive timing function. By selecting the Qualification page, you enable a “Qualification Mode” which uses advanced predictive lap timing based on an automatically updated “best” reference lap.

User configurable timers can be adjusted for additional functionality (pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake discs or tyre temperatures (up to 16 points per tyre).
Communication with other devices in the car is provided via two built-in, independent CAN-BUS communication ports. CAN templates are provided for most popular ECUs, and are fully configurable, allowing you to connect our hardware to virtually any engine management system.
To ensure that all features work seamlessly, our device is based on a 32-bit automotive controller paired with a state of the art graphics processor. This combination provides the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second.
For further data analysis, data channels can be logged to a USB Flash drive with a frequency of up to 500Hz.
All of these “Must Have” features and more are housed in a rugged, specially CNC machined, black anodized enclosure.

Free, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams).

Supported ECUS:

AEM - Autronic SM4 - DTA Fast S Series - ECUMASTER CLASSIC BLACK - ECUMASTER PMU- EMTRON - EVO X - Hondata Kpro - Life Racing - Link ECU - Megasquirt- Motec M400 M600 M800 M1 - Pectal SQ-6 - Syvecs - Vipec - OBD2 over  can ECUS - Any ECU able to send info over Canbus.

SPECIFICATION


GENERAL

Temperature range AECQ100 GRADE1 (-40 to +85˚C)
Reverse battery protection Yes, internal
Operating voltage 6-22V, immunity to transients according to ISO 7637
Enclosure IP 60, custom CNC machined aluminum
Connectors 1 x 35 positions, AMP Automotive connector
PC communication CAN BUS – Ecumaster interface, Peak or Kvaser
Display Type TFT 800×600
Brightness of display 5″ – 600 cd/m2, 7″ – 1000 cd/m2

INPUTS / OUTPUTS

Analogue inputs 8 inputs, 10 bits, 0-5 V, software controlled pull-up/pull-down 10K resistor. Al analog inputs can be used as a switches
Digital inputs 8 digital inputs, software controlled input sensitivity (VR, Hall), software controlled 4K7 pull-up resistors, used for engine speed sensors, Flex Fuel, wheel speeds, turbocharger shaft speed. All digital inputs can be used as switches
Outputs 2 low side outputs (switch to ground), up to 2A, 1 analogue output (0-5V) 10 bits
+5V Output Monitored 5V output for powering external sensors

COMMUNICATION

CAN Interface 2 x CAN2.0 A/B, 250, 500, 1000 Kbps
CAN streams User-defined
Serial communication RS232 Rx/Tx, AiM protocols, Ecumaster, Hondata Kpro, Autronic
USB Used for logging to external USB memory

OTHERS

Light Emitting Diodes 15 ultra bright RGB LEDs
Accelerometer/gyroscope 3D accelerometer + 3D gyroscope for the analysis of vehicle dynamics
Real-time clock Yes, battery powered
Light sensor Yes, for automatic correction of brightness
Temperature sensor Yes, for monitoring device temperature
GPS Specification : This GPS to CAN module provides the CAN system with GPS data. This data can be used for data logging, lap timer and speed/acceleration.
USB to CAN Specification: The ECUMASTER USB to CAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. It is equipped with a LED status diode for fast diagnostic and a 120 Ohm terminator that can be switched on or off to relieve the user from applying external terminators.

CAN to USB interface, this product is necessary for communicating to the PMU & ADU as listed in the shop index, this product is also used for tracing live logging of CAN bus messages

*Required to configure ADU OR PMU

PRE MADE LOOM SPEC:

A loom pre built for your ECUMaster ADU5 or ADU7, using the original AMPSEAL connector. Taking away the stress of wiring in your own dash.

Fitted with:
  • 2 options for switches, these can be used for resetting page values and swapping pages. (Switches will be a random colour or finish and will need connecting by the user due to mounting them)
  • A connector on the end of a 1200mm length is used to connect power, ground and CANBUS. Including a GPS connection
  • Included as well is a port ready for CAN communication using the ECUMaster USB to CAN and a USB port to record your logs from the ADU.
The loom is wrapped in cable sleeve to give it a smart look and keep all wiring neat

We Also Recommend