LINK ECU G4 X MONSOON X Wirein ECU + Lambda + Dash options - Cosworth Pinto 1UZ etc

LINK ECU G4 X MONSOON X Wirein ECU + Lambda + Dash options - Cosworth Pinto 1UZ etc

The Link G4X MonsoonX is a compact standalone ECU that sits between the AtomX and Link's larger G4X ECUs, offering additional inputs, outputs and more advanced tuning and motorsport features.

It uses the same processor, firmware and PCLink software platform as the rest of the G4X range, making it a strong option for 4-cylinder and 2-rotor builds that need more flexibility than the entry-level AtomX.

Engine Support

The MonsoonX can control:

• Up to 4 cylinders

• Up to 2 rotors

• Sequential fuel injection

• Direct spark ignition

ECU Features

• Built-in MAP Sensor

• 8 Custom Math Blocks

• Flex Fuel

• Trigger Oscilloscope

• Flexible Engine Protection Limiters

• CAN Keypad Control

• VVT Control

• Open Loop Boost Control

• Closed Loop Boost Control

• Onboard Lambda Sensor Control

• Dual Closed Loop Lambda

• Compatible with aftermarket displays via CAN or serial stream

• 512MB Internal Data Logging

Motorsport Features

• Launch Control

• Anti-Lag

• Gear Shift Control

• Paddle Shift Control

Important I/O Note

The MonsoonX can support the advanced functions listed above, but the number of features that can be used at the same time depends on the available inputs and outputs.

Some functions require multiple I/O channels, so the final configuration should be planned around the requirements of the individual vehicle.

Outputs

• 4 Injection Drives

• 4 Ignition Drives

• 6 Auxiliary Outputs

• +5V Sensor Power Supply

Unused Injection and Ignition Drives can also be used as Auxiliary Outputs where required.

Inputs

• 4 Digital Inputs

• 2 Temperature Inputs

• 4 Analogue Inputs

• 2 Trigger Inputs

• 1 Knock Input

Unused Temperature and Analogue Inputs can also be configured as Digital Inputs.

Communications

• 1 CAN Bus Channel

• Mini-B USB Tuning Connection

Data Logging

• 512MB onboard logging memory

• Up to 100kHz maximum total logging rate

• Up to 250 logging channels

Dimensions

Length: 95mm
Width: 130mm
Height: 45mm

Weight

220g

Construction

The ECU is housed in a glass-filled nylon enclosure.

Electrical Specification

Operating Voltage Range: 6.5V to 24V
Maximum Input Voltage: 36V
Maximum Continuous Current Draw: 3A
Operating Current: 200mA

Operating Conditions

• Manufactured to ISO 13485 standard

• Ambient operating temperature: -30°C to 90°C

Connector

The MonsoonX uses:

• 1 x Superseal 4 Row 34 Position connector

What's Included

• Link G4X MonsoonX ECU

• Quick Start Guide

• Mounting Bracket

• USB Tuning Cable

• LinkECU Stickers

Please Note

The MonsoonX is a wire-in standalone ECU and requires a suitable wiring loom and professional installation.

Professional calibration is recommended to suit the specific engine and vehicle setup.