Link ECU G4 G4+ G4X G5 34 Way 2.5m MEDIUM Terminated A Loom Wiring

Link 2.5m A Loom

The Link 2.5m A Loom is a pre-assembled wiring harness designed for custom installations using compatible Link wire-in ECUs.

It is terminated with a SUPERSEAL 1.0 connector at the ECU end and left unterminated at the opposite end, giving you a convenient starting point for building a professional custom engine harness without having to terminate the ECU connector yourself.

Suitable Applications

Compatible with:

• All Link G5 Wire-In ECUs

• All Link G4X Wire-In ECUs

• Link G4+ Atom

• Link G4+ Atom II

• Link G4+ Monsoon

• Link G4+ Storm Blue

• Link G4+ Storm Black

• Link G4+ Fury

• Link G4+ Xtreme

• Link G4+ Thunder

• Link G4 Storm

• Link G4 RX

• Link G4 Xtreme

• Vipec V44

• Vipec i44

• Vipec V88

• Vipec i88

Important Compatibility Information

• Does not suit earlier pre-G4+ Atom ECUs

• Wire-In ECUs using two ECU connectors require both an A Loom and B Loom

• The matching 2.5m B Loom is available separately

Key Features

• 2.5 metre wiring loom

• Pre-terminated Link A connector

• SUPERSEAL 1.0 ECU connector

• Unterminated flying leads at the opposite end

• All connector positions populated

• Wire colours match Link Wire-In manuals

• Suitable for custom engine harness construction

• Can also be used for other wiring projects using the same connector and compatible pin configuration

Wire Sizes

The loom uses:

• 0.75mm² wire for the two red power wires

• 0.75mm² wire for the four main power ground wires

• 0.5mm² wire for the remaining circuits

Equivalent wire sizes:

• 19AWG / 0.75mm²

• 20AWG / 0.5mm²

Electrical Specification

Operating Voltage Range: 0V to 24V
Maximum Input Voltage: 60V
Current Rating: 5A and 14A depending on circuit

Dimensions

Length: 2500mm
Width: 35mm
Height: 40mm

Weight

850g

Connector

• Link A SUPERSEAL 1.0

What's Included

• Link 2.5m A Loom

Please Note

Some Link Wire-In ECUs use two ECU connectors and therefore require both an A Loom and B Loom.

Please check the ECU connector configuration before ordering.