Turbosmart EBS E-BOOST2 Electronic 66mm 0-60psi Black Silver BOOST Controller
Turbosmart eBoost2 allows the user to control, monitor, map and compensate boost. But eBoost2 is more than just a boost controller – it can also control water spray, methanol or nitrous injection, manage shift/warning lights and read/monitor RPM. The eBoost2 has been effectively controlling up to six stages of boost by gear, boost by rpm, boost by time, and more, up to 60 psi, for over a decade. All in a self-contained gauge pod, with an over-boost shutdown to keep your motor safe from harm. While eBoost2 is fitted with state-of-the-art software, it has been designed to be easy and logical.
Standard with 60psi max boost operating pressure (120 HP Version Optional), the eBoost2 is a complete Boost Management System with market-leading features and state-of-the-art software, eBoost2 is the one accessory all owners of turbocharged cars should have! Easy to use yet sophisticated and technologically advanced, the eBoost2 is equally at home in a street-going vehicle as it is in a top-level racecar.
Features
Billet Alluminium Housing
Australian Developed, Manufactured & Hand Assembled
Up to 6 Boost Settings, with
Boost by RPM
Boost by Time
Boost by Gear
Boost on Demand (Push to pass)
Turbosmart Gate Feature
RPM Compensation
Peak Hold / Max Boost Recall
Live Boost or RPM readout
Overboost Shutdown
SUPPLIED WITH
Turbosmart eBoost2 Head Unit
Turbosmart 3 Port Solenoid
Wiring Loom
Hoses and Hose Fitting Kit
What’s the first rule of boost control?
Ensure you have an over-boost cut-out. This safety feature is built into all factory, aftermarket & programmable ECUs. The eBoost Range has an Over-Boost Shutdown feature built-in as well – You can never be too careful. Make sure it is set at a sensible & reasonable limit. Increasing the boost will put more load on your engine, and there are other tune-related factors you must always consider. If in any doubt, speak with a professional tuner/calibrator.
Can I use this on any turbocharged engine?
If your engine is turbocharged and uses a boost-based actuator for control, then yes. This Boost Controller will work on boost-based internal wastegate actuators and external wastegates.
How much boost can I add?
This will come down to the rest of your setup & tune. If in any doubt, we recommend you contact a professional tuner or workshop for advice here.
What is Gate Feature?
Gate Feature is a unique Turbosmart feature that ensures our boost controllers can give you the best possible response. Turbosmart’s Boost Controllers can provide the most aggressive boost curve by manipulating the pressure signal into your actuator.
How many boost levels can I have?
The Turbosmart eBoost Street has two levels & the eboost2 has 6. You can trigger these in several ways, including boost by gear.
What sizes are available?
eBoost Street: ¼ Din
eBoost2: 60mm
eBoost2: 66mm / 2 5/8”
How much Boost can it Control?
eBoost Street: Up to 40psi.
eBoost2: Up to 60psi
eBoostHP: Up to 120psi.
