Ecumaster EMU Black Plug & Play ECU Kit for JZX100 1JZ 1JZ-GTE VVTi

The Ecumaster EMU Black Plug & Play ECU Kit is designed for Toyota JZX100 1JZ-GTE VVTi engines with manual transmission.

This kit includes the Ecumaster EMU Black ECU and the dedicated JZX100 VVTi 1JZ plug-and-play adaptor, allowing installation of the EMU Black standalone ECU without building a custom engine loom.

Designed for vehicles with the 4-row ECU connector, this plug-and-play solution provides a clean and convenient route to modern standalone engine management for performance, tuning, drift, track, and motorsport applications.

Key Features

Designed for JZX100 1JZ-GTE VVTi
Suitable for Toyota JZX100 VVTi 1JZ-GTE applications.

Manual Transmission Applications
Designed for manual transmission vehicles.

4-Row ECU Connector Compatibility
Suitable for vehicles with 4 rows of pins on the ECU connector.

Ecumaster EMU Black Included
This kit includes the Ecumaster EMU Black standalone ECU.

Plug & Play Adaptor Included
Supplied with the dedicated JZX100 VVTi 1JZ-GTE plug-and-play adaptor for a cleaner installation.

No Custom Loom Required
The adaptor allows the EMU Black to be connected to the factory ECU wiring, reducing wiring work and simplifying installation.

Supplied with Pinout Information
Includes pinout information for the ECUMaster EMU terminals.

EMU Black Highlights

• Advanced standalone engine management
• Fuel, ignition, boost, idle, auxiliary, and motorsport strategy control
• Active and passive ignition coil support
• Drive-by-wire throttle capability
• Bosch LSU 4.2 and LSU 4.9 wideband oxygen sensor support
• Built-in CAN bus communication
• Flex fuel input
• Hall / VR trigger input support
• High-current H-Bridge outputs
• CNC-machined aluminium enclosure
• IP65 water-resistant enclosure design
• USB PC communication

What’s in the Box

• 1 × Ecumaster EMU Black ECU
• 1 × JZX100 VVTi 1JZ-GTE plug-and-play adaptor
• 1 × Pinout information for ECUMaster EMU terminals

Important Notes

• Designed for JZX100 VVTi 1JZ-GTE manual transmission applications
• Suitable for vehicles with 4-row ECU connector
• This kit includes the Ecumaster EMU Black ECU
• Professional installation and calibration are recommended
• Additional sensors, wiring, and tuning may be required depending on the vehicle setup

Lead Time Note

Please note there may be a 5–7 working day lead time if the adaptor needs to be built to order. We will confirm availability and build status after purchase where required.

Motorsport Use Notice

This product is intended for performance, motorsport, drift, track, and off-road applications. Installation and calibration should be carried out by a qualified professional. It is the customer’s responsibility to ensure the product is suitable and legal for their intended use and location.