Cart 0

Accessoires

Accessories

Brand

Connector

ECU

Engine

Loom

Make

Model

Sensor

Thread

Type

Engine Management

Plugin and Standalone Engine management solutions for all and any projects you might have. Fitting and mapping also available, please contact us for a quote on this.
THINWALL AUTOMOTIVE 0.5mm 12V AUTO CABLE 11A CAR ENGINE LOOM WIRE - SOLID COLOURS

THINWALL AUTOMOTIVE 0.5mm 12V AUTO CABLE 11A CAR ENGINE LOOM WIRE - SOLID COLOURS

THINWALL AUTOMOTIVE 0.5mm 12V AUTO CABLE 11A ENGINE CAR LOOM WIRE VERY HIGH Quality 0.5mm Thinwall cable Perfect for Car Engine Looms Thinner than most @1.6mm Harsh Environment Automotive PLATED...
ECUMASTER EMU Black Engine Management Unit ECU

ECUMASTER EMU Black Engine Management Unit ECU

The EMU Black  stand-alone engine management system is designed to operate the most advanced and complex engines available. It is a successor of our proven system, EMU. Throughout EMU’s lifetime...
Link Engine Management - Link ECU - Link G4+ Atom ECU 1UZFE Kit with K20 coils & Loom - Brands Hatch Performance

Link ECU G4+ G4X Atom X Storm X Xtreme X Thunder 1UZFE 1UZ-FE 1UZ Kit with Wiring Engine Loom & K20 Coils

Our 1UZFE Kits are taking the engine swap scene by storm, and its easy to see why: At the heart of the conversion, a Link ECU, choose from the baby...

Save $715
Sold Out
0 - 150psi high accuracy Pressure sensor with connector ideal for Link ECU MOTEC SYVECS

0 - 150 psi high accuracy Pressure sensor with connector ideal for Link ECU MOTEC SYVECS

0-150psi high accuracy sensor with connector.1/8 NPT0.5v = 0PSI4.5 = 150PSI Pin A = GroundPin B = +5 VoltsPin C = Signal Out N.B. Insert wires through plug before crimping...
Sold Out
Race Engine Loom Rubber Grommet 60mm Bulkhead 16mm outlet Cosworth Kit Car

Race Engine Loom Rubber Grommet 60mm Bulkhead 16mm outlet Cosworth Kit Car

Race Engine Loom Rubber Grommet60mm Bulkhead hole | 16mm outlet | 78mm overallWill Fit All Ford Cosworth Cars.Very flexible great for race and kit cars.VERY HIGH QUALITY USED IN RACE...
Link Engine Management - Link ECU - Link G4+ Can Lambda 4.9 Bosch Sensor - Brands Hatch Performance

LINK ECU CAN LAMBDA With Bosch LSU 4.9 Lambda Sensor

CAN Lambda Link’s CAN-Lambda is an easy to use CAN-module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. The CAN-Lambda’s ability to...
ECUMASTER 12 8 6 Key CANBUS KeyPAD Keyboard Switches

ECUMASTER 12 8 6 4 Key CANBUS KeyPAD Keyboard Switches

Can bus keypad easily integrated with our PMU-16 and Ecumaster standalone EMU Black.  Very rugged and fully waterproof. 8 available colours which appear in the back light part of the unit, this can be used to...
EV6 EV14 USCAR Fuel injector Plug Motec DTA MBE Weber Alpha Megasquirt ECU

EV6 EV14 USCAR Fuel injector Plug Motec DTA MBE Weber Alpha Megasquirt ECU

Bosch EV6 / EV14 - Fuel Injector Connector / Plug ConnectorVERY HIGH QUALITY USED IN RACE LOOMS AVAILABLE in SETS of 1 ,2 ,4,6 and 8 !The injector in the...
Haltech WB1 Single Channel CAN O2 Wideband Lambda Controller Kit incl sensor

Haltech WB1 Single Channel CAN O2 Wideband Lambda Controller Kit incl sensor works with Link ECU

Haltech WB1 Single Channel CAN O2 Wideband Lambda Controller Kit incl sensor LENGTH: 1.2M (4ft) INCLUDES : Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable,...
ECUMASTER Power Management Distribution Unit Module PMU 16 & PMU 16 Data Logger

ECUMASTER Power Management Distribution Unit Module PMU 16 & PMU 16 Data Logger

*Can to USB Box Required for Configuring.  Decades ago, the critical electronic components in a race car were the ignition coil and points. Race cars now feature advanced engine management...
Link G4X Monsoon X ECU Ford RS Cosworth YB engine Kit with Wiring Engine Loom & Bosch 550cc / 1000cc Injectors & K20 Coils

Link G4X Monsoon X ECU Ford RS Cosworth YB engine Kit with Wiring Engine Loom & Bosch 550cc / 1000cc Injectors & K20 Coils

At BHP we have spent a long time perfecting the installation of Link ECU's into Cosworth YB Powered Cars including the Sierra & Escort RS Cosworth and a multitude of...
LINK ECU G4 G4+ G4X 4 bar MAP Sensor & Connector / Plug

LINK ECU G4 G4+ G4X 4 bar MAP Sensor & Connector / Plug

LINK Ecu G4 G4+ G4X 4 bar MAP Sensor & Connector / Plug 4 Bar MAP Sensor  MAP Sensor capable of reading up to 4 Bar (3 Bar of boost)...
Bosch Knock Sensor With Mating Connector ideal for Link ECU Motec Syvec etc

Bosch Knock Sensor With Mating Connector ideal for Link ECU Motec Syvec etc

Bosch Knock Sensor With Mating Connector ideal for Link ECU Motec Syvec etc
ECUmaster Steering Wheel Canbus Board

ECUmaster Steering Wheel Canbus Board

A CAN switch board is a tiny device to allow easy transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition to this, the...
Cosworth YB Colour Engine Loom Plug Kit

Cosworth YB Colour Engine Loom Plug Kit

Cosworth YB Engine Loom Plug Kit Complete Plug Kit to re terminate the aging loom, this kit literally solves 99% of loom problems. Contains the following: 9 x 2 Pin...
Link ECU G4+ G4X 1/8NPT Air Temp Temperature Sensor (IAT1-8)

Link ECU G4+ G4X 1/8NPT Air Temp Temperature Sensor (IAT1-8)

Link G4+ G4X Air Temp Sensor (IAT1-8) 1/8" NPT complete with plug and terminals
LINK ECU G4+ G4X CANF Can f CONNECTOR

LINK ECU G4+ G4X CANF Can f CONNECTOR

Soldering Required for Assembly !
LINK ECU G4 X MONSOON X Wirein ECU - Cosworth Pinto 1UZ etc

LINK ECU G4 X MONSOON X Wirein ECU - Cosworth Pinto 1UZ etc

Link G4X Monsoon X ECU Specification: More features, more powerful. The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at...
ECUMASTER EMU CLASSIC Engine Management Unit ECU

ECUMASTER EMU CLASSIC Engine Management Unit ECU

We are excited to announce a new and improved version of our popular EMU engine control unit: the EMU Classic. ECUMASTER Goal is to provide the best possible products at...
Ecumaster 8 Channel EGT to CAN Module - Works perfect with Link ECU

Ecumaster 8 Channel EGT to CAN Module - Works perfect with Link ECU

ECUMASTER EGT to CAN The EGT to CAN module collects input signals from 8 EGT probes (K-Type thermocouples), converts the probe voltage into a numerical temperature figure and sends the...
Link G4X Fury Wirein ECU with on Board Lambda and Electronic Throttle

Link G4X Fury Wirein ECU with on Board Lambda and Electronic Throttle

0% interest free finance available! call us on 01474 850666 The Link G4X Fury,  Fully featured, fully enabled and our first ECU to include on-board digital wideband control, along with...
Link ECU 7" MXG Strada CAN ROAD RACE Car Dash Display

Link ECU 7" MXG Strada CAN ROAD RACE Car Dash Display

Link MXG Strada 7” dash, powered by AIM. The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights...
Link CAN LAMBDA Terminating Resistor

Link CAN LAMBDA Terminating Resistor

Terminating Resistor for CAN Bus Networks
Link ECU Mitsubishi GTO / 3000GT / Stealth - Link G4+ Plugin Replacement ECU

Link ECU Mitsubishi GTO / 3000GT / Stealth - Link G4X Plugin Replacement ECU

Direct Plug in LINK ECU for Mitsubishi GTO / 3000GT / STEALTH  1991 - 1993 Free yourself from the constraints of the factory ECU Fits inside the original factory enclosure...

Save $22
LINK Plug in Ecu - XS Expansion Loom for Additional Inputs and Outputs XSL

LINK Plug in Ecu - XS Expansion Loom for Additional Inputs and Outputs XSL

LINK Plugin Ecu - XS Expansion Loom for Additional Inputs and Outputs   Xsl Expansion loom suitable for any Link Plugin Ecus where additional inputs or outputs are needed.