Powerflex Bushes

Front Bump Stop The bump stops on Transporter T3 vehicles have previously been modified to suit lowered and standard vehicles, although shortened versions have been available before, these have long...

Powerflex Handling Pack ( 2012 - ) This kit is suitable for 2WD Multi-link and 4WD vehicles only and is recommended for petrol models only. PFF85-832 Lower Engine Mount Insert...

Lower Radiator Mount PFF80-1330

Front Gearbox Mount Bush PFF76-420BLK

Jack Pad Adaptor PF3-1661 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle....

Front Wishbone Inner Ball Joint, Negative Camber PFF5-132G adds an additional 1.25 of negative camber. These new ball joints brackets are made from high quality cast steel along with long...

Steering Rack Mount PFF5-103BLK

Front Anti Roll Bar Bush 16mm Please check anti roll bar diameter before ordering PFF5-102-16BLK

Front Wishbone Rear Bush, Caster Adjusted PFF5-101G offers additional +2 of caster and is a high performance option to PFF5-101. Aimed at offering greater precision with improved geometry for people...

Rear Differential Mount PFR3-107H

Front Subframe Front Bush 10mm Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-120-12. PFF3-120-10H

Front Subframe Rear Bush 12mm Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-121-10. PFF3-121-12H

Front Subframe Rear Bush 10mm Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-121-12. PFF3-121-10H

Front Subframe Front Bush 12mm Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-120-10. PFF3-120-12H

Front Wishbone Bush This bush fits pressed steel front wishbones with 37mm bush. For cast wishbones with 45mm bush, fit PFF3-102. PFF3-101H

Front Wishbone Bush This bush fits cast wishbones with 45mm bush. For pressed steel wishbones with 37mm bush, use PFF3-101. PFF3-102H

Rear Trailing Arm Front Bush Also fits VW New Beetle Mk1 and Skoda Octavia MK1 4WD models. To adjust the vehicles rear toe angle, please use PFR3-508G. PFR3-508BLK

Front Anti Roll Bar Mount 26mm PFF3-103-26BLK

Powerflex Mini Cooper S JCW R52 R53 W11B16a Gen 1 2000 - 2006 LOWER ENGINE MOUNT FAST ROAD TRACK PFF5-125P An anodised CNC-Machined 6082 Aluminium mount pre-fitted with polyurethane bushes,...

Powerflex Mini Cooper S JCW R52 R53 W11B16a Gen 1 2000 - 2006 LOWER ENGINE MOUNT FAST ROAD PFF5-125 An anodised CNC-Machined 6082 Aluminium mount pre-fitted with polyurethane bushes, for...

Powerflex Mini Cooper S JCW R52 R53 W11B16a Gen 1 2000 - 2006 LOWER ENGINE MOUNT TRACK USE PFF5-125BLK An anodised CNC-Machined 6082 Aluminium mount pre-fitted with polyurethane bushes, for...

Powerflex Mini Cooper S JCW R52 R53 W11B16a Gen 1 2000 - 2006 CLUTCH FORK PIVOT PIN PFF5-170 The factory plastic clutch fork pivot pins (and even some aftermarket bronze/brass...

PFF5-131G is an incredibly simple way to change the virtual roll centre of the car to increase resistance to body roll and correct suspension geometry on lowered vehicles. Lowering the...

PFR5-1103 is a complete bush that fits into trailing arm bracket OE numbers: 33306799089 33306799090, 33309807099 and 3330980710. For inserts use PFR5-1102 which fit into the original rubber bush. OEM...

Lower Engine Mount Link Small Bush Fits Mini ONE COOPER S JCW R50 R52 R53 W10B16A W11B16A Engines OEM Part Number: 22116756406