Link ECU G4X 4 pin powered CAN Connector Cable for Plugin ECU CANJST4

Link CANJST4 300mm CAN Connection Cable

The Link CANJST4 300mm CAN Connection Cable is designed for newer Link G4X Plug-In ECUs fitted with the 4-pin powered CAN connector.

It plugs directly into the ECU PCB and provides both CAN communication and a protected 12V supply, making it easy to connect and power compatible CAN accessories such as a CAN Lambda module, dash, EGT amplifier or other low-current CAN devices.

Suitable Applications

Suitable for:

• Newer Link G4X Plug-In ECUs with the 4-pin powered CAN connector

• Link CAN Lambda modules

• CAN displays and dashes

• EGT amplifiers

• Other compatible low-current CAN accessories

• CAN devices with a combined continuous current draw below 3A

Compatible Plug-In ECUs

• G4X Nissan GTR with E-Throttle

• G4X Nissan S15 with E-Throttle

• G4X Honda S2000 AP1

• G4X Subaru WRX V5-6

• G4X Honda HC20X Type-R DC5 / RSX

• G4X Subaru WRX11

• G4X MX5NB2X

• G4X MX5NB1X

• G4X WRX11 USDM

• G5 Plug-In Toyota GT86 / Subaru BRZ LHD

• G5 Plug-In Toyota GT86 / Subaru BRZ RHD

Key Features

• Designed for newer 4-pin powered CAN Plug-In ECUs

• JST4 ECU connection

• DTM4 male CAN connector

• Provides CAN communication and 12V power

• Protected 12V supply from the ECU

• Suitable for powering compatible low-current CAN accessories

• Pre-wired using the standard Link CAN pinout

• 300mm cable length

CAN Pinout

• Pin 1: 12V

• Pin 2: Ground

• Pin 3: CAN Low

• Pin 4: CAN High

Electrical Specification

Maximum Input Voltage: 300V
Maximum Continuous Current: 3A
Wire Size: 20 AWG / 0.5mm²

Connected CAN devices should have a combined continuous current draw below 3A.

Dimensions

Overall Length: 400mm
Cable Length: 300mm
Width: 20mm
Height: 20mm

Weight

35g

Connector

• DTM4 Male to JST4

• 12V and Ground terminated through the JST4 connector

What's Included

• 1 x Link CANJST4 300mm CAN Connection Cable

Please Note

This cable is for the newer 4-pin powered CAN connector and is not intended for older Link Plug-In ECUs using the 5-pin JST CAN connection.

Please check the CAN connector fitted to your ECU before ordering.