LINK ECU G4X Monsoon Wire-In Bundle - ECU + Loom + Sensors - Ideal for Turbo / Boosted Engines

Link G4X MonsoonX Wire-In ECU Bundle

A complete wire-in package for installing a Link G4X MonsoonX ECU into your chosen vehicle.

This bundle is ideal for 4-cylinder or 2-rotor applications that need more I/O and motorsport functionality than the entry-level AtomX, without stepping up to one of the larger G4X ECUs.

The kit includes the ECU, a 2.5 metre terminated A loom and the main engine sensors required to get started with a custom installation.

Bundle Includes

• Link G4X MonsoonX ECU

• 2.5m Medium A Loom

• Air Temperature Sensor

• Coolant Temperature Sensor

• Pressure Sensor

Engine Support

The MonsoonX can control:

• Up to 4 cylinders

• Up to 2 rotors

• Sequential fuel injection

• Direct spark ignition

Link G4X MonsoonX ECU

The MonsoonX sits between the AtomX and Link's larger G4X ECUs, providing additional inputs, outputs and more advanced tuning and motorsport functionality in a compact package.

It uses the same processor, firmware and PCLink software platform as the rest of the G4X range.

ECU Features

• Built-in MAP Sensor

• 8 Custom Math Blocks

• Flex Fuel

• Trigger Oscilloscope

• Flexible Engine Protection Limiters

• CAN Keypad Control

• VVT Control

• Open Loop Boost Control

• Closed Loop Boost Control

• Onboard Lambda Sensor Control

• Dual Closed Loop Lambda

• Compatible with aftermarket displays via CAN or serial stream

• 512MB Internal Data Logging

Motorsport Features

• Launch Control

• Anti-Lag

• Gear Shift Control

• Paddle Shift Control

Important I/O Note

The MonsoonX can support the advanced functions listed above, but the number of features that can be used at the same time depends on the available inputs and outputs.

Some functions require multiple I/O channels, so the final configuration should be planned around the requirements of the individual vehicle.

Outputs

• 4 Injection Drives

• 4 Ignition Drives

• 6 Auxiliary Outputs

• +5V Sensor Power Supply

Unused Injection and Ignition Drives can also be used as Auxiliary Outputs where required.

Inputs

• 4 Digital Inputs

• 2 Temperature Inputs

• 4 Analogue Inputs

• 2 Trigger Inputs

• 1 Knock Input

Unused Temperature and Analogue Inputs can also be configured as Digital Inputs.

Communications

• 1 CAN Bus Channel

• Mini-B USB Tuning Connection

Data Logging

• 512MB onboard logging memory

• Up to 100kHz maximum total logging rate

• Up to 250 logging channels

Supplied Sensors

The bundle includes:

• Air Temperature Sensor

• Coolant Temperature Sensor

• Pressure Sensor

These provide the main additional engine measurements required for many custom wire-in installations.

Wiring Loom

The kit includes a 2.5 metre Medium A Loom for the MonsoonX.

This provides the main ECU wiring needed to build a custom engine harness for the vehicle.

Dimensions

Length: 95mm
Width: 130mm
Height: 45mm

Weight

220g

Construction

The ECU is housed in a glass-filled nylon enclosure.

Electrical Specification

Operating Voltage Range: 6.5V to 24V
Maximum Input Voltage: 36V
Maximum Continuous Current Draw: 3A
Operating Current: 200mA

Operating Conditions

• Manufactured to ISO 13485 standard

• Ambient operating temperature: -30°C to 90°C

What's Included with the ECU

• Link G4X MonsoonX ECU

• Quick Start Guide

• Mounting Bracket

• USB Tuning Cable

• LinkECU Stickers

Please Note

This is a wire-in ECU bundle, not a vehicle-specific plug-in kit.

The supplied loom must be wired to suit the individual engine and vehicle installation.

Professional installation and calibration are recommended.