Link ECU Exhaust Gas Temperature Probe Sensor EGT X6

Link ECU Exhaust Gas Temperature Probe Sensor EGT X6

The Link Exhaust Gas Temperature Probe is an extreme-duty, fast-response Type K thermocouple designed for accurate exhaust gas temperature measurement in high-performance and motorsport applications.

Its exposed sensing junction provides a fast response to temperature changes, making it suitable for monitoring exhaust temperatures during engine tuning and under demanding operating conditions.

The probe uses an Inconel outer sheath, stainless steel protected wiring and an adjustable 316 stainless steel compression fitting for reliable installation in harsh engine and racing environments.

Suitable Applications

Compatible with:

• Link G4+ Thunder ECU with dedicated EGT inputs

• Other Link ECUs when used with a suitable thermocouple amplifier

• Link CANEGT controllers

• Other aftermarket ECUs supporting Type K thermocouples

Important Compatibility Information

A thermocouple amplifier is required when using this probe with a Link ECU that does not have a suitable onboard thermocouple input.

Correct polarity must be observed:

• Yellow = Positive (+)

• Red = Negative (-)

Key Features

• Type K thermocouple

• Fast-response exposed sensing junction

• Ungrounded sensing junction

• Temperature range from -100°C to 1300°C

• Approx. 150ms response time

• Inconel outer sheath

• 1.8m stainless steel overbraided cable

• Adjustable 316 stainless steel compression fitting

• 1/8"-27 NPT male mounting thread

• Suitable for EGT-based engine protection

• Suitable for individual cylinder fuel trim strategies

Temperature Range

-100°C to 1300°C

Accuracy

±0.4% of reading or approximately ±1.1°C

Probe Specification

Probe Diameter: 6.35mm / 1/4"
Response Time: 150ms
Mounting Thread: 1/8"-27 NPT male

Dimensions

Overall Length: 1950mm
Width: 15mm
Height: 85mm

Weight

105g

Construction

• Inconel outer sheath

• Stainless steel overbraided cable

• 316 stainless steel compression fitting

What's Included

• Link Exhaust Gas Temperature Probe X6

• K-Type Thermocouple Connector

• Printed Instructions

Please Note

A suitable thermocouple amplifier or compatible ECU input is required.

Please check ECU compatibility before ordering and ensure the probe is installed with the correct polarity.