Nissan 350Z VQ35DE 02-06 Manual & Auto Link ECU Plugin

Link G4X Nissan N350X Plug-In ECU – 350Z / Skyline V35 / Infiniti G35

The Link G4X Nissan N350X Plug-In ECU gives you modern standalone engine management while retaining the convenience of a genuine plug-in ECU.

Designed for the Nissan 350Z and other supported VQ35DE applications, the N350X fits directly into the factory ECU location using the original mounting points, wiring loom and ECU connectors.

No replacement engine loom or adaptor harness is required. The ECU is designed to work with the factory wiring while retaining supported original vehicle functions and maintaining a clean, factory-style installation.

A startup map is included to help get the engine running ready for final setup and calibration.

The N350X uses the same processor, firmware and PCLink software as the rest of the Link G4X range and includes the standard G4X feature set.

Suitable Applications

The N350X is designed to suit the following applications:

• Nissan 350Z / Fairlady Z Z33 with VQ35DE engine – 2002 to 2006

• Nissan Skyline V35 with VQ35DE engine – 2003 to 2006

• Infiniti G35 with VQ35DE engine – 2003 to 2006

Important Compatibility Information

Please check your original ECU connector arrangement against the ECU header shown in the product photos before ordering.

• Suitable for manual transmissions

• Suitable for automatic transmissions

• Includes onboard MAP sensor

• Most factory features are supported

• It is highly recommended to fit an IAT sensor

• Built-in E-Throttle / Drive-by-Wire control

G4X N350X Features

• Dual CAN Bus

• E-Throttle Control

• Flex Fuel

• Trigger Oscilloscope

• 3 Axis Accelerometer

• Selectable Temperature Input Pull-ups

• Flexible Engine Protection Limiters

• CAN Keypad Control

• VVT Control

• Open Loop Boost Control

• Closed Loop Boost Control

• Dual Closed Loop Lambda

• Direct Automatic Transmission Control

• Compatible with leading aftermarket displays via CAN or serial stream

• 512MB Internal Data Logging

• Built-in MAP sensor

IAT Sensor

It is highly recommended to fit an Intake Air Temperature sensor when using the N350X.

Motorsport Features

• Nitrous Control

• Launch Control

• Anti-Lag

• Cruise Control

• Traction Control

• Race Timer and Power Management

• Gear Shift Control

• Paddle Shift Control

Inputs and Outputs

For the complete list of available inputs and outputs, please refer to the Link N350X Installation Manual.

Communications

• 2 CAN Bus Channels

• LTW 6-Pin USB Tuning Connection

Dimensions

Length: 190mm
Width: 180mm
Height: 40mm

Weight

720g

Electrical Specification

Operating Voltage Range: 6.5V to 24V
Maximum Input Voltage: 36V
Maximum Continuous Current Draw: 5.5A

What's Included

• Link G4X Nissan N350X Plug-In ECU

• Anti-static strap

• 4 x M4 x 16 cap screws

• USB tuning cable

• Link stickers

• Plug-In manual card

• Product registration card

Please Note

The ECU is supplied with a startup map to assist with initial setup. This is not a finished vehicle calibration.

Professional setup and tuning are recommended before the vehicle is driven under load.